Products

Permascand WTS has four slim, safe and almost self sufficient models for desinfection of water. All are easy to install, service and monitor.

PermaChlor_Buffer
Buffer:
120B, 250B, 500B, 1000B, 1500B, 2000B, 3000B and 6000B

The Buffer system is the salt chlorinator that is best suited for pools where the hypochlorite requirement is more varied. This model makes it easy to regulate the production volume of hypochlorite.
The Buffer system is mounted in the machine room and produces hypochlorite from the municipal water supply and a saturated salt solution. Hypochlorite is then stored in a storage tank and supplied on demand to the main pool pipe. The concentration in of hypochlorite delivered by the Buffer system is 0.6-0.8%.

For detailed information, go to datasheet

PermaChlor_AC
AC Inline:
200AC, 400AC, 800AC and 1200AC

If the pool water has high levels of lime, iron and other minerals we recommend installing a AC model.
The cell in the AC model is mounted close to the main pipe. From the main pipe a part of the water flow is diverted through the cell where the water is chlorinated and then led back to the main pipe. The AC model is cleaned automatically with a hydrochloric acid solution of about 5-9%. It is important that the pool water has a salt concentration above 0.4%.

For detailed information, go to datasheet

PermaChlor_OnLine
Online:
120, 250, 500 and 1000

Online is best suited for pool facilities that aim for storage free hypochlorite production and water treatment plants.
The salt chlorinator dose not take up much space and is easily mounted in the machine room of the pool facility where it produces hypochlorite from the municipal water supply and a saturated salt solution. The hypochlorite is then fed into the main pipe which is supplying water to the pool.

For detailed information, go to datasheet

WTS_ir

IR
50, 100, 200 and 400

IR is the obvious choice for a facility where the pool water has a low level lime, iron and other minerals.
The cell is mounted directly on the main pipe and is automatically cleaned by reversing the poles on the electrodes – a comfortable and easy way to clean pool water. It is important that the salt concentration of the pool water is above 0.4%.